When Garmin released the Xero Chronograph, we were excited to get our hands on one, but we instantly noticed a case was not included. Look no further than the Cole-TAC Xero Pouch, the perfect accessory to complement your shooting gear. We designed and crafted this zippered pouch to protect and conveniently carry your Xero chronograph, with or without the Area419 ARCALOCK Arm.

(FISPAK-AIO)

(For shooters who don’t trust “she’ll be right” maintenance)

This is the big-league pistol kit — the one you break out when you’re serious about keeping your handgun running flawlessly and fully in your control. Holster guns, competition pistols, optics-equipped rigs — if it sits in a safe or goes to the range, this kit makes sure it performs.

It’s like taking a proper gunsmith’s bench and shrinking it into a portable, organised, problem-solving machine. If a screw comes loose, a pin walks out, or your optic decides to go on its own little adventure — you fix it on the spot, properly.

🔧 What’s Inside

(Everything you need — zero filler)

Core Tools
• Ratchet T-Handle with locking hex drive
• Mini All-In-One Torque Driver — no more guessing torque
• Extension / punch holder
• Brass hammer head
• Soft, organised carry case
• Magnetic parts tray
• Bench block

Pistol Maintenance Essentials
• 1/16", 3/32", 5/32" pin punches
• 1/8" roll pin punch
• 1/16", 3/32", 1/8", 5/32" brass pin punches
• Set of four brass cleaning rods (8-32 thread compatible)
• Steel pick
• Cleaning brush
• 8-32 adapter

Red Dot / Handgun Optics Tools
• Aimpoint® bit
• Battery cap tool
• Grip screw bit
• Spring tool
• Slide tool

Glock®-Specific Helpers
• Magazine base plate removal tool
• Channel remover
• Channel installer
• Sight tool

1911 Support
• 1911 bushing wrench

Alignment & Build Tools
• T-pins (always useful during assembly)

🛠 Bits on Bits on Bits

21 x 1" chrome-plated bits
• Torx: T6, T8, T10, T15, T20, T25
• Metric Hex: 1.5, 2, 2.5, 3, 4mm
• SAE Hex: .050", 1/16", 5/64", 3/32", 1/8", 5/32"
• Phillips: P0, P1
• Slotted: 3/32", 3/16"

2 x 2" bits
• Torx: T10
• Slotted: 3/32"

🎯 Why You Want It

• Keeps your pistol(s) tight, tuned, and competition-ready
• Mini torque driver = precision where it matters
• Handle any optical or mechanical hiccup immediately
• Compact, organised, and zero dead weight
• Because letting a loose screw ruin a score is unacceptable

🔥 Ideal For

• Pistol shooters with optics
• Competition rigs and match prep
• Guns with lots of screws, springs, and “attitude”
• On-range armourer work
• Gun owners who take responsibility for their own performance

💬 Bottom Line

If you run pistols hard, treat them right.
This kit keeps your sidearm — and your score — locked in.

(FISCPK)

(Pocket-sized problem solver for people who actually shoot)

This isn’t a “maybe I’ll use it someday” set — this is the kit you grab when you want to keep a pistol running perfectly, sights tight every time, and a match on track no matter what decides to loosen itself.

It’s compact. It’s organised. And the Mini All-In-One Torque Driver means your optics and pistol accessories get tightened to the exact torque — not the “send it ‘til it squeaks” method.

Throw it in a range bag, holster pack, glove box — wherever. When something moves, you fix it properly, fast.

What’s Inside

(Everything you need — none of the useless filler)

Core Tools

• Ratchet T-Handle with locking hex drive
• Mini All-In-One Torque Driver
  — the secret sauce for getting optic and sight screws just right
• Carrying case with molded low-profile bit holders (fits any ¼" base accessory)

Pistol Maintenance Tools

• 3/32" pin punch
• 1/8" pin punch
• Steel pick
• Cleaning brush bit
• Four brass rods + 8-32 adapters (for patch loops / jags etc.)
• Sight tool for Glock®
• 1911 bushing wrench
• Aimpoint® bit (because red dots are the future)

Twelve ¼" Electroless Nickel Bits

• Torx: T6, T8, T10, T15
• Phillips: P1
• Metric Hex: 1.5mm, 2mm, 3mm
• SAE Hex: 1/16", 5/64"
• Slotted: 3/32" (extended for hard-to-reach optic screws), 5mm

Why You Want It

• Keeps pistol optics tight = keeps zero right
• Fixes issues on the spot so your stage score doesn’t tank
• Tiny enough to go everywhere
• Precision tools designed for modern handguns and accessories

Ideal For

• Carry and competition handguns
• Slide-mounted optics / pistol red dots
• Armorer work at home or at the range
• Shooter who refuses to let a loose screw ruin a day

Bottom Line

A pistol that’s maintained properly is a pistol you can trust.
This kit makes it easy to trust yours — anywhere you go.

(FIS-WORKS-VTD)

(All-In-One Torque Driver + Firearm Maintenance & Accessory Bit Kit)

If you’re the type of shooter who actually maintains their gear instead of leaving it up to hope and duct tape… this is your kit.

“The Works” is your fix-anything, tighten-everything, sort-your-life-out toolkit — designed for when a loose optic, stubborn screw, or gunked-up bolt threatens to ruin your day. It packs a torque driver, cleaning gear, adjustment tools and a frankly ridiculous number of bits into one compact, take-everywhere case.

You’ll wonder how you got through matches without it.

What’s Inside

Core Tools

• Adjustable All-In-One Torque Driver (15–65 in-lb)
• T-Handle Wrench
• ½″ Socket & Bit Adapter

Firearm Setup & Adjustment Tools

• Action & chassis hardware tools
• Mini pry bar (for when “gentle persuasion” isn’t enough)
• Steel & plastic pin punches
• General hardware driver for bases, rails and accessories
• Tough castle-style wrench ideal for barrel nuts, buffer tubes, lock collars, etc.

Cleaning & Bolt Maintenance Tools

• Bolt & carrier scraper (because carbon never takes a day off)
• Bronze scraper
• Steel pick
• Cleaning brush bit
• Brass cleaning rods (8-32 thread) + adapters

Handgun & Shotgun Essentials

• Front sight tool (Glock® compatible)
• Universal choke tube wrench
• 1911 bushing tool

Bits — 24 x Electroless-Nickel ¼″ Drivers

• Torx: T8, T10, T15, T20, T25, T27, T30
• Hex SAE: .050", 5/64", 3/32", 1/8", 7/64", 9/64", 5/32", 3/16", 1/4"
• Hex Metric: 2.5mm, 3mm, 4mm, 5mm
• Phillips: P1, P2
• Slotted: 3/16", 3/32"

Extra Goodies

• Magnetic parts patch (keeps screws from rolling into another postcode)
• Organized molded case that’s compact enough for your range backpack

Why you need it

• Torque things properly — no more “good enough”
• Fix issues on-the-fly and get back to shooting
• One case replaces half your bench tools
• If it twists or tightens on a firearm — this kit does it

Ideal for

• Precision rifle setup and maintenance
• Optics installation & adjustment
• Accessory installs (rails, bipods, sling mounts, chassis parts)
• Bolt, action & trigger maintenance
• Shotgun and pistol tune-ups

Bottom line:
It’s called “The Works” because it handles the work. All of it.

The base layer of precision.

Every stable shot starts somewhere — this is where it starts.
The Bedrock is your rifle’s foundation, the solid layer beneath your shooting bag, optics, or range gear. Designed to deliver unshakeable support on any surface, it’s lightweight, compact, and 3D printed to handle real field abuse.

The surface features strategically placed traction holes that act as anchors for waxed bags, gripping in tight and stopping micro-movement shot after shot. It’s printed from a special high-friction filament chosen to help your bag stick to the Bedrock instead of sliding off — giving you a more stable and repeatable shooting platform.

Whether you’re shooting off an Armageddon Gear Schmedium, glassing with binos, or steadying your rangefinder, the Bedrock keeps everything locked in. Mount it directly to a tripod via the embedded 3/8" nut, or clip it on and off in seconds using the built-in ARCA rail — no tools, no nonsense.

It’s simple:
Your bag rests on it. Your rifle rests on the bag. Your confidence rests on the Bedrock.

Built for performance, designed for comfort — the Eberlestock Camas Pants are ready for whatever your day throws at you. Whether you’re on the range, in the field, or just living life outdoors, these pants deliver a perfect blend of mobility, durability, and style.

Crafted from a durable four-way stretch nylon blend (95% Nylon / 5% Spandex) with a DWR (Durable Water Repellent) finish, they shrug off water and dirt while moving freely with you. The UPF 50+ rating provides superior sun protection, and the articulated knees and gusseted crotch keep you unrestricted when climbing, kneeling, or getting into position.

An interior silicone-lined waistband ensures a no-slip fit, while Cordura-reinforced thigh pockets stand up to knife clips and heavy use. Multiple storage options — two outside slot pockets and two rear zip pockets — keep your essentials secure and within reach.

Key Features:

• Four-way stretch, water-resistant fabric
• 95% Nylon / 5% Spandex blend
• DWR finish for weather resistance
• UPF 50+ sun protection
• Articulated knees and gusseted crotch for mobility
• Silicone-lined waistband for a secure fit
• Cordura-reinforced knife-friendly pockets
• Dual rear zippered pockets

The modern shooter is expected to store and organize an enormous amount of equipment. To help keep your precious equipment organized and easy to locate, Cole-TAC developed the Popcorn Bag.

The Popcorn Bag weighs nothing, packs down to nothing, and keeps that essential equipment easily accessible in cavernous rucksacks. Our Bag compresses your gear into an easy-to-pack shape, and a pull loop on the Popcorn Bag makes it easy to retrieve from a tightly packed backpack.

Whether you’re segmenting your medical equipment based on injury, keeping your camping toiletries squared away, or stashing some spare mags, the Popcorn Bag will keep you from pulling out your hair trying to locate what you need.

Like all our other incredible Cole-TAC products, our Popcorn Bag is 100% made in the U.S.A. out of American-made fabric and hardware.

Features:

• Pull Loop for Easy Backpack Retrieval  
• Available in Easy-to-See Colors or Camouflage
• Keeps Gear Compressed During Use
• Packs Flat During Storage

Keep your optics and lasers clean and dry with the Cole-TAC Shower Cap. Made from a water-resistant, lightweight material, our rugged optics cover is the raincoat your binos and spotting scope need. This advanced material is 30% lighter than 500D Cordura Nylon but just as strong. The seams are double stitched for extra strength and security. The bungee cord can be adjusted to provide quick installing and removal. The small paracord loop allows you to attach it when not in use. The small size is perfect for a set of binos or a single laser rangefinder. The large size is designed for the plate setups that have multiple optics installed. The Cole-TAC Shower Cap is designed and manufactured in the USA by a company that stands behind your gear, no matter what. Get yours today and keep your optics clean.

Small Dimensions: 8” x 10” x 6”
Large Dimensions: 11” x 15” x 6”

The Ammo Novel from Cole-TAC is the latest ammo storage system that is designed specifically for the competition shooters in mind. Don’t worry about running out of ammo when the match director decides to stretch out the day. This can hold 120 rounds of your favorite calibers. Now you don’t have to worry about your ammo bouncing or spilling from the plastic reloading boxes. Like all of our other products, the Ammo Novel ammo storage system is made here in the USA with only the highest quality materials by a company that stands behind all of its gear.

• Standard size fits the following calibers: .22-250, .243, 6mm Creedmoor, 6.5mm Creedmoor, 7mm-08, .308, .338 Federal, 7mm Rem Mag, .270 Win, .30-06, 300 Win Mag, 338 Win Mag

Stay comfortable and stylish on your outdoor adventures with the Leofoto Unisex Hat. Crafted from a durable blend of cotton and polyester, this hat offers breathability and long-lasting wear. Its adjustable design ensures a snug fit for most head sizes, making it a versatile accessory for photographers and outdoor enthusiasts alike. 

The EMOD Boned Out Game Bags are designed to protect meat from any element, allowing it to cool and dry quickly. The bag is constructed with lightweight, breathable, and durable fabrics that trap odor and won’t fail.

Lightweight webbing loops assist in securing the bag to our EMOD system.

The Eberlestock Boned Out Game Bags are available in two sizes. Both the medium and large are designed to fit perfectly between the frame and your pack.

The Playbook V2 from Cole-TAC offers the latest way to keep you organized on the range and at the match. The half clipboard holds paper for notes or your course of fire matchbook. Our integrated elastic organizer allows you to store a pen, Sharpie, and weather meter, and a small pocket keeps additional paperwork neatly organized. Updated from Cole-TAC’s original Playbook, our improved Playbook V2 features a sturdier outer cover, using B52 Squadron material that enhances durability and reduces bulk. We also made the elastic closure more accessible in order to enable repair and replacement.