(FISTLS11-MTD)

For anyone who’s ever wondered: “Did I tighten that right?” — now you’ll know.

This kit gives you four preset torque limiters — 15, 25, 45 & 65 in-lb — the most commonly needed torque values for firearms setups. Each limiter tightens fasteners to its exact setting, then clicks and free-spins to stop you turning that screw into modern art.

It also includes Fix It Sticks’ Modular T-Drive, a compact handle that lets you apply consistent torque with comfort and control — whether at the bench, in the safe, or halfway through a muddy PRS stage.

Kit Includes

• ⭐ 15 in-lb Torque Limiter
• ⭐ 25 in-lb Torque Limiter
• ⭐ 45 in-lb Torque Limiter
• ⭐ 65 in-lb Torque Limiter
• 🔧 Modular T-Drive handle
• 🎒 Compact zippered case

Why this kit is a winner

• Covers the torque values you’ll use all the time
• Works with any ¼-inch bits or drivers
• Click + stop means perfect torque — no overdoing it
• Small enough that you can (and should) take it everywhere

Where to use it
Mounting scopes. Securing actions. Bolting Pic rails. Anything where the phrase “don’t overtighten that” has ever been muttered.

(FISPAK-AIO)

(For shooters who don’t trust “she’ll be right” maintenance)

This is the big-league pistol kit — the one you break out when you’re serious about keeping your handgun running flawlessly and fully in your control. Holster guns, competition pistols, optics-equipped rigs — if it sits in a safe or goes to the range, this kit makes sure it performs.

It’s like taking a proper gunsmith’s bench and shrinking it into a portable, organised, problem-solving machine. If a screw comes loose, a pin walks out, or your optic decides to go on its own little adventure — you fix it on the spot, properly.

🔧 What’s Inside

(Everything you need — zero filler)

Core Tools
• Ratchet T-Handle with locking hex drive
• Mini All-In-One Torque Driver — no more guessing torque
• Extension / punch holder
• Brass hammer head
• Soft, organised carry case
• Magnetic parts tray
• Bench block

Pistol Maintenance Essentials
• 1/16", 3/32", 5/32" pin punches
• 1/8" roll pin punch
• 1/16", 3/32", 1/8", 5/32" brass pin punches
• Set of four brass cleaning rods (8-32 thread compatible)
• Steel pick
• Cleaning brush
• 8-32 adapter

Red Dot / Handgun Optics Tools
• Aimpoint® bit
• Battery cap tool
• Grip screw bit
• Spring tool
• Slide tool

Glock®-Specific Helpers
• Magazine base plate removal tool
• Channel remover
• Channel installer
• Sight tool

1911 Support
• 1911 bushing wrench

Alignment & Build Tools
• T-pins (always useful during assembly)

🛠 Bits on Bits on Bits

21 x 1" chrome-plated bits
• Torx: T6, T8, T10, T15, T20, T25
• Metric Hex: 1.5, 2, 2.5, 3, 4mm
• SAE Hex: .050", 1/16", 5/64", 3/32", 1/8", 5/32"
• Phillips: P0, P1
• Slotted: 3/32", 3/16"

2 x 2" bits
• Torx: T10
• Slotted: 3/32"

🎯 Why You Want It

• Keeps your pistol(s) tight, tuned, and competition-ready
• Mini torque driver = precision where it matters
• Handle any optical or mechanical hiccup immediately
• Compact, organised, and zero dead weight
• Because letting a loose screw ruin a score is unacceptable

🔥 Ideal For

• Pistol shooters with optics
• Competition rigs and match prep
• Guns with lots of screws, springs, and “attitude”
• On-range armourer work
• Gun owners who take responsibility for their own performance

💬 Bottom Line

If you run pistols hard, treat them right.
This kit keeps your sidearm — and your score — locked in.

(FISFAK-AIO)

(AKA: Your Entire Workbench, Sorted Into a Carry Case)

If MacGyver was into precision shooting instead of mullets and explosions — this is what he’d carry.

This is the most comprehensive, most capable, “I can fix literally anything right now” toolkit Fix It Sticks makes… and it’s still portable. Take it to a match, the farm, the bench, or that mate’s place who always needs “a quick sight install” — this thing is ready.

Rifles? ✔️
Pistols? ✔️
Shotguns? ✔️
Optics? ✔️
Mysterious rattles? ✔️
Tiny roll pins that try to escape into another dimension? ✔️

If it goes bang and has screws, pins, or moving bits — this kit has a tool for it.

What’s Inside

(Brace yourself, it’s a big list — because this is a big kit.)

Choose your flavour:
✔ With All-In-One Torque Driver (large or mini)

Core Tools

• Ratchet T-Handle w/ locking hex drive
• Extension / punch holder
• ½″ socket + adapter
• Mini pry bar
• Bench block
• Magnetic tray (keeps tiny metal parts from entering the void)
• Soft, organised carry case

Platform Maintenance Tools

• Universal choke wrench
• 1911 bushing wrench
• Remington® 700 bolt opener
• Brass hammer head (for persuading things politely)
• A2 sight adjuster
• Aimpoint® bit
• Adjustable 3/8″ wrench
• Steel pick, bronze scraper, cleaning brush

Punches & Pin Tools
(aka “stay in there, you little %#&@” tools)

• Pin punch set
• Brass pin punch set
• Roll pin punch set
  (All 1/16" → 1/4")

Bolt / Action Care

• .223 bolt carrier group scraper
• .308 bolt carrier group scraper

Handgun Helpers

• Front sight tool (Glock® compatible)
• Magazine base plate tool (Glock)
• Channel remover / installer (Glock)

**Now the Bits…

SO. MANY. BITS.**

36 x 1" Chrome-Plated Bits

• Torx: T6, T8, T10, T15, T20, T25, T27, T30
• Metric Hex: 1.5–8mm
• SAE Hex: .050"–1/4" range
• Phillips: P0, P1, P2
• Slotted: 2–5mm

24 x 2" Chrome-Plated Bits

• Torx / Phillips / Slotted
• Hex (metric & SAE)
  (Full exact list preserved, no guesswork)

6 x 4" Extended Action Bits

• SAE Hex: 5/64", 1/8", 5/32", 3/16"
• Metric Hex: 5mm
• Torx: T30

Why you’ll love it

• It replaces a full gunsmith bench — in one case
• No more “I’ll fix it later” excuses — do it now
• Torque = accuracy = happy shooter
• Saves range days, matches, and friendships

Perfect for

• Competition shooters
• Working on multiple firearm platforms
• Serious home armourers
• Travelling with the ability to fix absolutely anything

Bottom line:
If you shoot a lot, this is the toolkit that prevents the wheels coming off — literally.

Fix It Sticks Model 700® Toolkit

A portable workshop built around the Model 700 platform.

(FIS-700TK)

The Remington 700 platform has become the foundation for countless hunting, competition and precision rifles—and the Fix It Sticks Model 700 Toolkit has been designed to keep them running smoothly when it matters.

This comprehensive kit combines general firearm maintenance tools with specialised Model 700 equipment, giving you the ability to torque components, access recessed action screws, clean the action, disassemble the bolt and handle minor repairs without dragging an entire workshop to the range.

At the heart of the kit is the Fix It Sticks Ratcheting T-Way Wrench and All-In-One Torque Driver, providing controlled torque adjustment from 15 to 65 in-lb. Whether you're working on action screws, scope rings, mounts or accessories, you can make precise adjustments using one compact system.

The dedicated Model 700 Quick Action Brush uses horizontal nylon brushes to clean the action raceways, while the rotating swab helps remove debris from inside the action. The included Model 700 Bolt Opener makes bolt and firing-pin disassembly far easier—without reaching for shoelaces, dental floss or whatever other questionable field-expedient method you've used in the past.

Everything is organised inside a compact soft carrying case with a moulded bit holder, magnetic parts patch and additional storage for small components and accessories.

Key Features

• Designed for maintaining and customising Model 700-style rifles.

• Ratcheting T-Way Wrench provides excellent leverage and control.

• All-In-One Torque Driver covers settings from 15 to 65 in-lb.

• Model 700 Quick Action Brush cleans the action raceways and internal surfaces.

• Dedicated Model 700 Bolt Opener assists with bolt and firing-pin disassembly.

• Extended action bits reach recessed screws in grips and trigger guards.

• Cleaning, punch and general maintenance tools included.

• Magnetic patch helps prevent screws and small components from disappearing.

• Compact soft carrying case keeps the complete system organised and ready to travel.

Kit Includes

• Ratcheting T-Way Wrench with Locking Hex Drive.

• All-In-One Torque Driver, adjustable from 15 to 65 in-lb.

• Model 700 Quick Action Brush with Large Parts Holder.

• Five replacement cleaning swabs.

• Model 700 Bolt Opener.

• Small Parts Holder.

• Extension and Punch Holder.

• 8-32 threaded adapter.

• 1/2-inch socket and 1/4-inch bit adapter set.

• Two brass cleaning rods that accept 8-32 threaded attachments.

• Cleaning brush.

• Steel pick.

• Brass hammer head.

• Three steel pin punches:

  • 1/16 inch

  • 3/32 inch

  • 1/8 inch

• Two 4-inch Extended Action Bits:

  • 5/32 inch

  • 3/16 inch

• Magnetic patch for holding screws and small parts.

• Soft carrying case with moulded bit holder.

• 24 electroless nickel-plated 1-inch bits.

Included 1-Inch Bits

Metric Hex

• 2.5mm

• 3mm

• 4mm

• 5mm

Imperial Hex

• .050 inch

• 5/64 inch

• 3/32 inch

• 1/8 inch

• 7/64 inch

• 9/64 inch

• 5/32 inch

• 3/16 inch

• 1/4 inch

Torx

• T8

• T10

• T15

• T20

• T25

• T27

• T30

Phillips

• PH1

• PH2

Slotted

• 3/16 inch

• 3/32 inch

Built for the range, field or workbench.

A dirty action, loose mount or incorrectly torqued action screw can quickly turn a good day into a frustrating one. The Fix It Sticks Model 700 Toolkit gives you the specialised tools needed to deal with those problems properly—without leaving the range or relying on improvised tools.

Compact enough to travel with your rifle but comprehensive enough to handle serious maintenance, it is an outstanding toolkit for hunters, competitive shooters and anyone who wants to look after their Model 700-style rifle properly.

Because when you've invested serious money into your rifle and optics, attacking them with the rusty Allen keys from the kitchen drawer probably isn't the best maintenance plan.

(FIS-WORKS-VTD)

(All-In-One Torque Driver + Firearm Maintenance & Accessory Bit Kit)

If you’re the type of shooter who actually maintains their gear instead of leaving it up to hope and duct tape… this is your kit.

“The Works” is your fix-anything, tighten-everything, sort-your-life-out toolkit — designed for when a loose optic, stubborn screw, or gunked-up bolt threatens to ruin your day. It packs a torque driver, cleaning gear, adjustment tools and a frankly ridiculous number of bits into one compact, take-everywhere case.

You’ll wonder how you got through matches without it.

What’s Inside

Core Tools

• Adjustable All-In-One Torque Driver (15–65 in-lb)
• T-Handle Wrench
• ½″ Socket & Bit Adapter

Firearm Setup & Adjustment Tools

• Action & chassis hardware tools
• Mini pry bar (for when “gentle persuasion” isn’t enough)
• Steel & plastic pin punches
• General hardware driver for bases, rails and accessories
• Tough castle-style wrench ideal for barrel nuts, buffer tubes, lock collars, etc.

Cleaning & Bolt Maintenance Tools

• Bolt & carrier scraper (because carbon never takes a day off)
• Bronze scraper
• Steel pick
• Cleaning brush bit
• Brass cleaning rods (8-32 thread) + adapters

Handgun & Shotgun Essentials

• Front sight tool (Glock® compatible)
• Universal choke tube wrench
• 1911 bushing tool

Bits — 24 x Electroless-Nickel ¼″ Drivers

• Torx: T8, T10, T15, T20, T25, T27, T30
• Hex SAE: .050", 5/64", 3/32", 1/8", 7/64", 9/64", 5/32", 3/16", 1/4"
• Hex Metric: 2.5mm, 3mm, 4mm, 5mm
• Phillips: P1, P2
• Slotted: 3/16", 3/32"

Extra Goodies

• Magnetic parts patch (keeps screws from rolling into another postcode)
• Organized molded case that’s compact enough for your range backpack

Why you need it

• Torque things properly — no more “good enough”
• Fix issues on-the-fly and get back to shooting
• One case replaces half your bench tools
• If it twists or tightens on a firearm — this kit does it

Ideal for

• Precision rifle setup and maintenance
• Optics installation & adjustment
• Accessory installs (rails, bipods, sling mounts, chassis parts)
• Bolt, action & trigger maintenance
• Shotgun and pistol tune-ups

Bottom line:
It’s called “The Works” because it handles the work. All of it.

(FIS-RBO)

(Because field-stripping shouldn’t require a wrestling match)

When you’re running a Remington® 700-platform rifle and need to access the firing pin assembly, this is the tool that keeps things fast, clean and drama-free. No pliers. No screwdriver blade gymnastics. Just a clean “bottle-opener” style lever motion that does the job without chewing up your bolt.

The synthetic bushing protects your finish. The steel body keeps the action strong and reliable. And with a ¼" hex base, it works with any Fix It Sticks driver or T-Way wrench — so it slots straight into your existing toolkit.

🔧 Features & Benefits

• Quick, easy firing-pin access
• Steel construction for durability, with molded bushing for finish protection
• Clean “bottle-opener” action for effortless leverage
• ¼" hex base — compatible with all Fix It Sticks drivers
• Compact and lightweight — perfect for field or bench use
• Designed specifically for Remington® 700-style bolts

🎯 Ideal For

• Bolt disassembly in the field
• Long-range shooters who can’t afford delays
• Any R700 owner with pride in their gear
• Competition or hunting rifles that need fast serviceability

💬 Bottom Line

A tiny tool that solves a big headache.
Keep your Rem 700 operating clean, slick and competition-ready.

(FISMUTK)

Fix It Sticks Rifle & Optics Toolkit w/ All-In-One Torque Driver (15-65 in-lb)
If you’ve ever asked yourself “Did I screw that down right?” this kit answers “Yes, you did.” Every. Single. Time.

This all-in-one toolkit steps up for the shooter, armourer and tech-savvy builder: no more guesswork, no more “hope it holds” anxiety. With a torque driver dialled from 15 to 65 in-lb, you’re covered across scope rings, mounts, action screws and pretty much any rail-bolt tasked in the field or at the bench.

What’s in the case

• All-In-One Torque Driver (15-65 in-lb)
• T-Way T-Handle Wrench
• 15 precision bits: T10, T15, T20, T25 + Hex 3/32", 5/64", 1/8", 5/32", 3/16", 2.5mm, 3mm, 4mm, 5mm + P1 + Slotted 5mm
• ¼-inch bit adapter set + ½-inch socket
• Zippered compact case with molded accessory holder.

Why you’ll haul this into your gear bag

• Multi-task: One tool covers a big torque range so you don’t carry multiple drivers.
• Field ready: Compact enough to stash in your kit, jacket pocket or range kit.
• Precision you can trust: Dial in the torque setting until the hash mark lines up — done.

Where it kills it
Mounting optics, clamping down rails, tweaking stock screws — whatever your build day or match day demands. Use this so you don’t end up with a loose bit or a stripped mount.

A little bit of reality (so you don’t lead with hype)
This driver is versatile rather than ultra-specific; it trades the sparse precision of single set limiters for a wide-range tool you can use everywhere.

(FISCPK)

(Pocket-sized problem solver for people who actually shoot)

This isn’t a “maybe I’ll use it someday” set — this is the kit you grab when you want to keep a pistol running perfectly, sights tight every time, and a match on track no matter what decides to loosen itself.

It’s compact. It’s organised. And the Mini All-In-One Torque Driver means your optics and pistol accessories get tightened to the exact torque — not the “send it ‘til it squeaks” method.

Throw it in a range bag, holster pack, glove box — wherever. When something moves, you fix it properly, fast.

What’s Inside

(Everything you need — none of the useless filler)

Core Tools

• Ratchet T-Handle with locking hex drive
• Mini All-In-One Torque Driver
  — the secret sauce for getting optic and sight screws just right
• Carrying case with molded low-profile bit holders (fits any ¼" base accessory)

Pistol Maintenance Tools

• 3/32" pin punch
• 1/8" pin punch
• Steel pick
• Cleaning brush bit
• Four brass rods + 8-32 adapters (for patch loops / jags etc.)
• Sight tool for Glock®
• 1911 bushing wrench
• Aimpoint® bit (because red dots are the future)

Twelve ¼" Electroless Nickel Bits

• Torx: T6, T8, T10, T15
• Phillips: P1
• Metric Hex: 1.5mm, 2mm, 3mm
• SAE Hex: 1/16", 5/64"
• Slotted: 3/32" (extended for hard-to-reach optic screws), 5mm

Why You Want It

• Keeps pistol optics tight = keeps zero right
• Fixes issues on the spot so your stage score doesn’t tank
• Tiny enough to go everywhere
• Precision tools designed for modern handguns and accessories

Ideal For

• Carry and competition handguns
• Slide-mounted optics / pistol red dots
• Armorer work at home or at the range
• Shooter who refuses to let a loose screw ruin a day

Bottom Line

A pistol that’s maintained properly is a pistol you can trust.
This kit makes it easy to trust yours — anywhere you go.

(FISPBP)

(Your pins stop running away now.)

Small parts love freedom. They’ll roll, bounce, and launch themselves into the nearest black hole the instant you take your eyes off them. The Pouch Block is the tiny table-top assistant that tells those parts to sit still and behave while you work.

Soft enough to protect your finish, tough enough to take actual use, and grippy enough that it won’t slide around mid-hammer-tap. Plus, it nests perfectly into the Fix It Sticks Armorer’s Kit case so you always know where it is — and where your pins aren’t.

🔧 Features & Benefits

• Secures small parts while driving pins — less chasing, less swearing
• High-impact polymer protects firearm surfaces & coatings
• Non-slip feet keep it planted on the bench or tabletop
• Integrates into Fix It Sticks Armorer’s Kit case for smart carry
• Compact and lightweight — lives where it’s needed, not in a drawer

🎯 Ideal For

• Punching roll pins & drift pins
• Pistol and rifle field maintenance
• On-range fixes where parts love to escape
• Anyone working on tiny bits with big consequences

💬 Bottom Line

The simplest tool often saves the most headaches.
This one keeps your pins where they belong — in the gun.

(FISEB6P)

(Finally… reach the screws that thought they were safe.)

Some screws like to hide. Deep in an action. Down inside a chassis channel. Buried behind a rail. They think they’re clever. These bits remind them they’re not.

This custom extended-length set gives you the reach you need without the awkward angles, swearing, or scratched hardware. Each bit features a ball-end for easier engagement at offset angles — except the T30, which keeps full torque transfer for precision rifle fasteners.

Compatible with any ¼″ driver — including all Fix It Sticks drivers and the T-Way Wrench — it slots straight into your existing kit.

🔧 What’s Inside (Manufacturer Verified)

• 3/16" — Remington 700, AICS, and similar platforms
• 5/32" — Ruger 10/22 V-Block screws
• 1/8" — KIDD components and tuning hardware
• 5/64" — General firearm fasteners
• 5mm — Action screws on various precision rifles & chassis systems
• T30 — Common precision rifle fasteners (non-ball-end for max torque)

Specs:
• Ball-end design (except T30)
• Shaft length: 0.1875" x 4.0"
• Standard ¼″ hex base — universal compatibility

🎯 Why You Want It

• Reach screws normal bits can’t
• Maintain proper alignment — less chance of stripping
• Perfect for trigger housings, chassis hardware, action bolts & hidden fasteners
• Keeps torque smooth even at awkward angles
• A simple upgrade that saves headaches and knuckles

🔥 Ideal For

• Precision rifle rigs
• Chassis systems
• Barrel and action hardware
• Hidden or recessed screws
• Anyone tired of thinking “why did they put that screw THERE?”

💬 Bottom Line

When access is the problem — this set is the solution.
If you maintain modern rifles, you’ll wonder how you lived without them.

(FISBLAB)

(Because at long range, “a little bit off” is a lot off)

If your rifle isn’t level, your shot won’t be either — especially when gravity has plenty of time to embarrass you. The Fix It Sticks Bubble Level Set makes sure your scope and rifle are locked perfectly upright so your elevation holds true and your shots track straight.

The turret level attaches magnetically for fast setup. The NATO/Pic rail level doubles as an anti-cant device, helping you keep the rifle square while shooting — not just during mounting. Both levels use high-quality UK-sourced vials for crisp, instant readings you can trust.

Small tools. Big effect on precision.

🔧 What’s Included

• Magnetic turret level — quick on/off, no fiddling
• NATO/Picatinny rail level — doubles as anti-cant aid
• Protective foam carrier with storage pouch

🎯 Why You Want It

• Keeps your optic level during mounting — saves your zero
• Keeps you level during shooting — saves your match
• Magnetic attachment is fast, secure and painless
• Lightweight and compact — lives happily in any range bag
• Accurate bubbles = accurate bullets

🔥 Ideal For

• Precision & long-range shooting
• Scope installation and leveling
• PRS/NRL comps where cant is the silent killer
• Anyone who cares where their bullet actually lands

💬 Bottom Line

A level rifle is an accurate rifle.
This set makes it effortless — on the bench and on the clock.

(FIS-HHBP)

(Because sometimes screws need encouragement.)

When tapping pins, persuading stubborn parts, or giving a component a gentle nudge back into alignment — this little hammer head is your “be nice, but not too nice” tool.

Made from brass to protect firearm finishes and avoid spark drama, it threads onto any Fix It Sticks driver or the T-Way wrench. That means you can swap from torque to tap in seconds, without carrying a full gunsmith hammer.

Small. Smart. Seriously handy.

🔧 Features & Benefits

• Soft brass face protects coatings and won’t mar metal
• Threads onto Fix It Sticks drivers — always ready when you are
• Strong enough for roll pins and stuck parts
• Lightweight and compact for field use
• A proper upgrade from “hitting it with whatever’s nearby”

🎯 Ideal For

• Punching roll pins without wrecking your finish
• Loosening stubborn assemblies
• Field repairs and match-day mishaps
• Gunsmithing tasks where finesse matters

💬 Bottom Line

If you ever find yourself saying “just a tap”…
this is the tool you want to be tapping with.