Because “that’ll do” doesn’t cut it when your scope starts wandering like a drunk kangaroo.

Meet the little tool that makes a big difference. Fix It Sticks Torque Limiters tighten screws to a precise preset value, then click and free-spin so you don’t Hulk-smash your fasteners into a warranty claim. Perfect torque — no more, no less.

Why it’s brilliant

• ±6% accuracy (you’re not guessing your way to that)
• Works with any ¼-inch bits or drivers
• Click + stop — even if you’re heavy-handed after a double espresso
• Colour-coded sleeves so grabbing the right torque value is idiot-proof (well, mostly)
• Labelled clearly for the times the colours get confusing
• Tough enough for thousands of cycles
• Pocket-sized — hides anywhere in your range bag

What it’s for
Scope rings, action screws, mounts, rails — anywhere the words “don’t over-tighten that” have ever been said.

Pick your flavour
All the limiters look the same, but torque value and colour change. Choose wisely… unless you like crooked reticles and emotional damage.

(FISTLS11-MTD)

For anyone who’s ever wondered: “Did I tighten that right?” — now you’ll know.

This kit gives you four preset torque limiters — 15, 25, 45 & 65 in-lb — the most commonly needed torque values for firearms setups. Each limiter tightens fasteners to its exact setting, then clicks and free-spins to stop you turning that screw into modern art.

It also includes Fix It Sticks’ Modular T-Drive, a compact handle that lets you apply consistent torque with comfort and control — whether at the bench, in the safe, or halfway through a muddy PRS stage.

Kit Includes

• ⭐ 15 in-lb Torque Limiter
• ⭐ 25 in-lb Torque Limiter
• ⭐ 45 in-lb Torque Limiter
• ⭐ 65 in-lb Torque Limiter
• 🔧 Modular T-Drive handle
• 🎒 Compact zippered case

Why this kit is a winner

• Covers the torque values you’ll use all the time
• Works with any ¼-inch bits or drivers
• Click + stop means perfect torque — no overdoing it
• Small enough that you can (and should) take it everywhere

Where to use it
Mounting scopes. Securing actions. Bolting Pic rails. Anything where the phrase “don’t overtighten that” has ever been muttered.

Fix It Sticks Multi-Tool – Shooting & Hunting Edition

The toolbox that fits in your pocket.

(FISRSH16)

Loose scope ring? Action screws worked themselves free? Need to make a quick adjustment before your next stage? The Fix It Sticks Multi-Tool is built for exactly those moments.

Designed specifically for shooters and hunters, this compact kit transforms into a genuine T-handle, giving you the leverage and control to tighten or loosen fasteners properly in the field. No awkward folding tools or tiny drivers—just a simple, incredibly effective system that works.

Machined from solid steel with magnetic 1/4" bit holders, the Multi-Tool is built to withstand years of abuse while remaining light enough to live permanently in your range bag, hunting pack or glovebox. The moulded storage bracket securely holds the two Fix It Sticks along with up to 18 bits, keeping everything organised and ready when you need it.

Whether you're tightening an optic, adjusting your chassis, fitting accessories or carrying out general maintenance, this is one of those tools you'll wonder how you ever lived without.

Features

• Converts into a full T-handle for superior leverage.
• Solid steel construction for exceptional strength and durability.
• Magnetic bit holders accept any standard 1/4" driver bit.
• Lightweight at only 116 grams with bits and storage bracket.
• Compact moulded holder keeps everything secure and organised.
• Perfect for PRS, NRL22, hunting, competition shooting and general firearm maintenance.

Includes 16 Essential Bits

• Metric Hex: 2.5mm, 3mm, 4mm, 5mm
• Imperial Hex: 1/8", 5/64", 3/32", 5/32", 3/16"
• Torx: T10, T15, T20, T25, T30
• Slotted #5
• Phillips #1

From the range to the back paddock, the Fix It Sticks Multi-Tool delivers workshop-quality performance in a package small enough to take anywhere. Because the best repair kit is the one you've actually got with you.

Fix It Sticks Model 700® Toolkit

A portable workshop built around the Model 700 platform.

(FIS-700TK)

The Remington 700 platform has become the foundation for countless hunting, competition and precision rifles—and the Fix It Sticks Model 700 Toolkit has been designed to keep them running smoothly when it matters.

This comprehensive kit combines general firearm maintenance tools with specialised Model 700 equipment, giving you the ability to torque components, access recessed action screws, clean the action, disassemble the bolt and handle minor repairs without dragging an entire workshop to the range.

At the heart of the kit is the Fix It Sticks Ratcheting T-Way Wrench and All-In-One Torque Driver, providing controlled torque adjustment from 15 to 65 in-lb. Whether you're working on action screws, scope rings, mounts or accessories, you can make precise adjustments using one compact system.

The dedicated Model 700 Quick Action Brush uses horizontal nylon brushes to clean the action raceways, while the rotating swab helps remove debris from inside the action. The included Model 700 Bolt Opener makes bolt and firing-pin disassembly far easier—without reaching for shoelaces, dental floss or whatever other questionable field-expedient method you've used in the past.

Everything is organised inside a compact soft carrying case with a moulded bit holder, magnetic parts patch and additional storage for small components and accessories.

Key Features

• Designed for maintaining and customising Model 700-style rifles.

• Ratcheting T-Way Wrench provides excellent leverage and control.

• All-In-One Torque Driver covers settings from 15 to 65 in-lb.

• Model 700 Quick Action Brush cleans the action raceways and internal surfaces.

• Dedicated Model 700 Bolt Opener assists with bolt and firing-pin disassembly.

• Extended action bits reach recessed screws in grips and trigger guards.

• Cleaning, punch and general maintenance tools included.

• Magnetic patch helps prevent screws and small components from disappearing.

• Compact soft carrying case keeps the complete system organised and ready to travel.

Kit Includes

• Ratcheting T-Way Wrench with Locking Hex Drive.

• All-In-One Torque Driver, adjustable from 15 to 65 in-lb.

• Model 700 Quick Action Brush with Large Parts Holder.

• Five replacement cleaning swabs.

• Model 700 Bolt Opener.

• Small Parts Holder.

• Extension and Punch Holder.

• 8-32 threaded adapter.

• 1/2-inch socket and 1/4-inch bit adapter set.

• Two brass cleaning rods that accept 8-32 threaded attachments.

• Cleaning brush.

• Steel pick.

• Brass hammer head.

• Three steel pin punches:

  • 1/16 inch

  • 3/32 inch

  • 1/8 inch

• Two 4-inch Extended Action Bits:

  • 5/32 inch

  • 3/16 inch

• Magnetic patch for holding screws and small parts.

• Soft carrying case with moulded bit holder.

• 24 electroless nickel-plated 1-inch bits.

Included 1-Inch Bits

Metric Hex

• 2.5mm

• 3mm

• 4mm

• 5mm

Imperial Hex

• .050 inch

• 5/64 inch

• 3/32 inch

• 1/8 inch

• 7/64 inch

• 9/64 inch

• 5/32 inch

• 3/16 inch

• 1/4 inch

Torx

• T8

• T10

• T15

• T20

• T25

• T27

• T30

Phillips

• PH1

• PH2

Slotted

• 3/16 inch

• 3/32 inch

Built for the range, field or workbench.

A dirty action, loose mount or incorrectly torqued action screw can quickly turn a good day into a frustrating one. The Fix It Sticks Model 700 Toolkit gives you the specialised tools needed to deal with those problems properly—without leaving the range or relying on improvised tools.

Compact enough to travel with your rifle but comprehensive enough to handle serious maintenance, it is an outstanding toolkit for hunters, competitive shooters and anyone who wants to look after their Model 700-style rifle properly.

Because when you've invested serious money into your rifle and optics, attacking them with the rusty Allen keys from the kitchen drawer probably isn't the best maintenance plan.