(FISPAK-AIO)

(For shooters who don’t trust “she’ll be right” maintenance)

This is the big-league pistol kit — the one you break out when you’re serious about keeping your handgun running flawlessly and fully in your control. Holster guns, competition pistols, optics-equipped rigs — if it sits in a safe or goes to the range, this kit makes sure it performs.

It’s like taking a proper gunsmith’s bench and shrinking it into a portable, organised, problem-solving machine. If a screw comes loose, a pin walks out, or your optic decides to go on its own little adventure — you fix it on the spot, properly.

🔧 What’s Inside

(Everything you need — zero filler)

Core Tools
• Ratchet T-Handle with locking hex drive
• Mini All-In-One Torque Driver — no more guessing torque
• Extension / punch holder
• Brass hammer head
• Soft, organised carry case
• Magnetic parts tray
• Bench block

Pistol Maintenance Essentials
• 1/16", 3/32", 5/32" pin punches
• 1/8" roll pin punch
• 1/16", 3/32", 1/8", 5/32" brass pin punches
• Set of four brass cleaning rods (8-32 thread compatible)
• Steel pick
• Cleaning brush
• 8-32 adapter

Red Dot / Handgun Optics Tools
• Aimpoint® bit
• Battery cap tool
• Grip screw bit
• Spring tool
• Slide tool

Glock®-Specific Helpers
• Magazine base plate removal tool
• Channel remover
• Channel installer
• Sight tool

1911 Support
• 1911 bushing wrench

Alignment & Build Tools
• T-pins (always useful during assembly)

🛠 Bits on Bits on Bits

21 x 1" chrome-plated bits
• Torx: T6, T8, T10, T15, T20, T25
• Metric Hex: 1.5, 2, 2.5, 3, 4mm
• SAE Hex: .050", 1/16", 5/64", 3/32", 1/8", 5/32"
• Phillips: P0, P1
• Slotted: 3/32", 3/16"

2 x 2" bits
• Torx: T10
• Slotted: 3/32"

🎯 Why You Want It

• Keeps your pistol(s) tight, tuned, and competition-ready
• Mini torque driver = precision where it matters
• Handle any optical or mechanical hiccup immediately
• Compact, organised, and zero dead weight
• Because letting a loose screw ruin a score is unacceptable

🔥 Ideal For

• Pistol shooters with optics
• Competition rigs and match prep
• Guns with lots of screws, springs, and “attitude”
• On-range armourer work
• Gun owners who take responsibility for their own performance

💬 Bottom Line

If you run pistols hard, treat them right.
This kit keeps your sidearm — and your score — locked in.

(FIS-WORKS-VTD)

(All-In-One Torque Driver + Firearm Maintenance & Accessory Bit Kit)

If you’re the type of shooter who actually maintains their gear instead of leaving it up to hope and duct tape… this is your kit.

“The Works” is your fix-anything, tighten-everything, sort-your-life-out toolkit — designed for when a loose optic, stubborn screw, or gunked-up bolt threatens to ruin your day. It packs a torque driver, cleaning gear, adjustment tools and a frankly ridiculous number of bits into one compact, take-everywhere case.

You’ll wonder how you got through matches without it.

What’s Inside

Core Tools

• Adjustable All-In-One Torque Driver (15–65 in-lb)
• T-Handle Wrench
• ½″ Socket & Bit Adapter

Firearm Setup & Adjustment Tools

• Action & chassis hardware tools
• Mini pry bar (for when “gentle persuasion” isn’t enough)
• Steel & plastic pin punches
• General hardware driver for bases, rails and accessories
• Tough castle-style wrench ideal for barrel nuts, buffer tubes, lock collars, etc.

Cleaning & Bolt Maintenance Tools

• Bolt & carrier scraper (because carbon never takes a day off)
• Bronze scraper
• Steel pick
• Cleaning brush bit
• Brass cleaning rods (8-32 thread) + adapters

Handgun & Shotgun Essentials

• Front sight tool (Glock® compatible)
• Universal choke tube wrench
• 1911 bushing tool

Bits — 24 x Electroless-Nickel ¼″ Drivers

• Torx: T8, T10, T15, T20, T25, T27, T30
• Hex SAE: .050", 5/64", 3/32", 1/8", 7/64", 9/64", 5/32", 3/16", 1/4"
• Hex Metric: 2.5mm, 3mm, 4mm, 5mm
• Phillips: P1, P2
• Slotted: 3/16", 3/32"

Extra Goodies

• Magnetic parts patch (keeps screws from rolling into another postcode)
• Organized molded case that’s compact enough for your range backpack

Why you need it

• Torque things properly — no more “good enough”
• Fix issues on-the-fly and get back to shooting
• One case replaces half your bench tools
• If it twists or tightens on a firearm — this kit does it

Ideal for

• Precision rifle setup and maintenance
• Optics installation & adjustment
• Accessory installs (rails, bipods, sling mounts, chassis parts)
• Bolt, action & trigger maintenance
• Shotgun and pistol tune-ups

Bottom line:
It’s called “The Works” because it handles the work. All of it.

(FISMUTK)

Fix It Sticks Rifle & Optics Toolkit w/ All-In-One Torque Driver (15-65 in-lb)
If you’ve ever asked yourself “Did I screw that down right?” this kit answers “Yes, you did.” Every. Single. Time.

This all-in-one toolkit steps up for the shooter, armourer and tech-savvy builder: no more guesswork, no more “hope it holds” anxiety. With a torque driver dialled from 15 to 65 in-lb, you’re covered across scope rings, mounts, action screws and pretty much any rail-bolt tasked in the field or at the bench.

What’s in the case

• All-In-One Torque Driver (15-65 in-lb)
• T-Way T-Handle Wrench
• 15 precision bits: T10, T15, T20, T25 + Hex 3/32", 5/64", 1/8", 5/32", 3/16", 2.5mm, 3mm, 4mm, 5mm + P1 + Slotted 5mm
• ¼-inch bit adapter set + ½-inch socket
• Zippered compact case with molded accessory holder.

Why you’ll haul this into your gear bag

• Multi-task: One tool covers a big torque range so you don’t carry multiple drivers.
• Field ready: Compact enough to stash in your kit, jacket pocket or range kit.
• Precision you can trust: Dial in the torque setting until the hash mark lines up — done.

Where it kills it
Mounting optics, clamping down rails, tweaking stock screws — whatever your build day or match day demands. Use this so you don’t end up with a loose bit or a stripped mount.

A little bit of reality (so you don’t lead with hype)
This driver is versatile rather than ultra-specific; it trades the sparse precision of single set limiters for a wide-range tool you can use everywhere.

(FISCPK)

(Pocket-sized problem solver for people who actually shoot)

This isn’t a “maybe I’ll use it someday” set — this is the kit you grab when you want to keep a pistol running perfectly, sights tight every time, and a match on track no matter what decides to loosen itself.

It’s compact. It’s organised. And the Mini All-In-One Torque Driver means your optics and pistol accessories get tightened to the exact torque — not the “send it ‘til it squeaks” method.

Throw it in a range bag, holster pack, glove box — wherever. When something moves, you fix it properly, fast.

What’s Inside

(Everything you need — none of the useless filler)

Core Tools

• Ratchet T-Handle with locking hex drive
• Mini All-In-One Torque Driver
  — the secret sauce for getting optic and sight screws just right
• Carrying case with molded low-profile bit holders (fits any ¼" base accessory)

Pistol Maintenance Tools

• 3/32" pin punch
• 1/8" pin punch
• Steel pick
• Cleaning brush bit
• Four brass rods + 8-32 adapters (for patch loops / jags etc.)
• Sight tool for Glock®
• 1911 bushing wrench
• Aimpoint® bit (because red dots are the future)

Twelve ¼" Electroless Nickel Bits

• Torx: T6, T8, T10, T15
• Phillips: P1
• Metric Hex: 1.5mm, 2mm, 3mm
• SAE Hex: 1/16", 5/64"
• Slotted: 3/32" (extended for hard-to-reach optic screws), 5mm

Why You Want It

• Keeps pistol optics tight = keeps zero right
• Fixes issues on the spot so your stage score doesn’t tank
• Tiny enough to go everywhere
• Precision tools designed for modern handguns and accessories

Ideal For

• Carry and competition handguns
• Slide-mounted optics / pistol red dots
• Armorer work at home or at the range
• Shooter who refuses to let a loose screw ruin a day

Bottom Line

A pistol that’s maintained properly is a pistol you can trust.
This kit makes it easy to trust yours — anywhere you go.

(FISPBP)

(Your pins stop running away now.)

Small parts love freedom. They’ll roll, bounce, and launch themselves into the nearest black hole the instant you take your eyes off them. The Pouch Block is the tiny table-top assistant that tells those parts to sit still and behave while you work.

Soft enough to protect your finish, tough enough to take actual use, and grippy enough that it won’t slide around mid-hammer-tap. Plus, it nests perfectly into the Fix It Sticks Armorer’s Kit case so you always know where it is — and where your pins aren’t.

🔧 Features & Benefits

• Secures small parts while driving pins — less chasing, less swearing
• High-impact polymer protects firearm surfaces & coatings
• Non-slip feet keep it planted on the bench or tabletop
• Integrates into Fix It Sticks Armorer’s Kit case for smart carry
• Compact and lightweight — lives where it’s needed, not in a drawer

🎯 Ideal For

• Punching roll pins & drift pins
• Pistol and rifle field maintenance
• On-range fixes where parts love to escape
• Anyone working on tiny bits with big consequences

💬 Bottom Line

The simplest tool often saves the most headaches.
This one keeps your pins where they belong — in the gun.