Products
Built for your general purpose needs wherever MOLLE webbing is accessible. Featuring a 2 Litre interior volume and a quick access exterior zipper pocket, this pouch keeps you organized and equipped for whatever your day holds.
*** Great for use inside Upranger backpacks ***
Built for your general purpose needs wherever MOLLE webbing is accessible. Featuring a 2 Litre interior volume and a quick access exterior zipper pocket, this pouch keeps you organized and equipped for whatever your day holds.
*** Great for use inside Upranger backpacks ***
Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney. Our rings are designed to mount to MIL STD 1913 picatinny rail.
Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney. Our rings are designed to mount to MIL STD 1913 picatinny rail.
Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney. Our rings are designed to mount to MIL STD 1913 picatinny rail.
Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney. Our rings are designed to mount to MIL STD 1913 picatinny rail.
Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney. Our rings are designed to mount to MIL STD 1913 picatinny rail.
Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney. Our rings are designed to mount to MIL STD 1913 picatinny rail.
Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney. Our rings are designed to mount to MIL STD 1913 picatinny rail.
Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney. Our rings are designed to mount to MIL STD 1913 picatinny rail.
Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney. Our rings are designed to mount to MIL STD 1913 picatinny rail.
Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney. Our rings are designed to mount to MIL STD 1913 picatinny rail.
Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney. Our rings are designed to mount to MIL STD 1913 picatinny rail.
Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney. Our rings are designed to mount to MIL STD 1913 picatinny rail.
Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney. Our rings are designed to mount to MIL STD 1913 picatinny rail.
Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney. Our rings are designed to mount to MIL STD 1913 picatinny rail.
Our Sniper Sled Drag Bags feature a triple-fold, tapered rifle bag design that folds flat into a shooting mat. The third leaf serves as an internal divider panel, making each an excellent two-rifle case. The removable harness system can be used with the rifle bag barrel up or barrel down. The included exterior pouches are perfectly sized for shooting accessories and can be removed for a slicker set up.
Our Sniper Sled Drag Bags feature a triple-fold, tapered rifle bag design that folds flat into a shooting mat. The third leaf serves as an internal divider panel, making each an excellent two-rifle case. The removable harness system can be used with the rifle bag barrel up or barrel down. The included exterior pouches are perfectly sized for shooting accessories and can be removed for a slicker set up.
Our Sniper Sled Drag Bags feature a triple-fold, tapered rifle bag design that folds flat into a shooting mat. The third leaf serves as an internal divider panel, making each an excellent two-rifle case. The removable harness system can be used with the rifle bag barrel up or barrel down. The included exterior pouches are perfectly sized for shooting accessories and can be removed for a slicker set up.
Our Sniper Sled Drag Bags feature a triple-fold, tapered rifle bag design that folds flat into a shooting mat. The third leaf serves as an internal divider panel, making each an excellent two-rifle case. The removable harness system can be used with the rifle bag barrel up or barrel down. The included exterior pouches are perfectly sized for shooting accessories and can be removed for a slicker set up.
-Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney.
Our rings are designed to mount to MIL STD 1913 picatinny rail.
Side clamp uses a T20 Torx driver at 40 in-lb (4.5Nm)
Top caps use a T20 Torx driver between 17-25 in-lb (1.9 - 2.8Nm)
-Engineered and made in Australia by Porter Machine Works. CNC machined from 7075-T651 Aluminium plate and anodised in Sydney.
Our rings are designed to mount to MIL STD 1913 picatinny rail.
Side clamp uses a T20 Torx driver at 40 in-lb (4.5Nm)
Top caps use a T20 Torx driver between 17-25 in-lb (1.9 - 2.8Nm)
(FISEB6P)
(Finally… reach the screws that thought they were safe.)
Some screws like to hide. Deep in an action. Down inside a chassis channel. Buried behind a rail. They think they’re clever. These bits remind them they’re not.
This custom extended-length set gives you the reach you need without the awkward angles, swearing, or scratched hardware. Each bit features a ball-end for easier engagement at offset angles — except the T30, which keeps full torque transfer for precision rifle fasteners.
Compatible with any ¼″ driver — including all Fix It Sticks drivers and the T-Way Wrench — it slots straight into your existing kit.
🔧 What’s Inside (Manufacturer Verified)
• 3/16" — Remington 700, AICS, and similar platforms
• 5/32" — Ruger 10/22 V-Block screws
• 1/8" — KIDD components and tuning hardware
• 5/64" — General firearm fasteners
• 5mm — Action screws on various precision rifles & chassis systems
• T30 — Common precision rifle fasteners (non-ball-end for max torque)
Specs:
• Ball-end design (except T30)
• Shaft length: 0.1875" x 4.0"
• Standard ¼″ hex base — universal compatibility
🎯 Why You Want It
• Reach screws normal bits can’t
• Maintain proper alignment — less chance of stripping
• Perfect for trigger housings, chassis hardware, action bolts & hidden fasteners
• Keeps torque smooth even at awkward angles
• A simple upgrade that saves headaches and knuckles
🔥 Ideal For
• Precision rifle rigs
• Chassis systems
• Barrel and action hardware
• Hidden or recessed screws
• Anyone tired of thinking “why did they put that screw THERE?”
💬 Bottom Line
When access is the problem — this set is the solution.
If you maintain modern rifles, you’ll wonder how you lived without them.
(FISEB6P)
(Finally… reach the screws that thought they were safe.)
Some screws like to hide. Deep in an action. Down inside a chassis channel. Buried behind a rail. They think they’re clever. These bits remind them they’re not.
This custom extended-length set gives you the reach you need without the awkward angles, swearing, or scratched hardware. Each bit features a ball-end for easier engagement at offset angles — except the T30, which keeps full torque transfer for precision rifle fasteners.
Compatible with any ¼″ driver — including all Fix It Sticks drivers and the T-Way Wrench — it slots straight into your existing kit.
🔧 What’s Inside (Manufacturer Verified)
• 3/16" — Remington 700, AICS, and similar platforms
• 5/32" — Ruger 10/22 V-Block screws
• 1/8" — KIDD components and tuning hardware
• 5/64" — General firearm fasteners
• 5mm — Action screws on various precision rifles & chassis systems
• T30 — Common precision rifle fasteners (non-ball-end for max torque)
Specs:
• Ball-end design (except T30)
• Shaft length: 0.1875" x 4.0"
• Standard ¼″ hex base — universal compatibility
🎯 Why You Want It
• Reach screws normal bits can’t
• Maintain proper alignment — less chance of stripping
• Perfect for trigger housings, chassis hardware, action bolts & hidden fasteners
• Keeps torque smooth even at awkward angles
• A simple upgrade that saves headaches and knuckles
🔥 Ideal For
• Precision rifle rigs
• Chassis systems
• Barrel and action hardware
• Hidden or recessed screws
• Anyone tired of thinking “why did they put that screw THERE?”
💬 Bottom Line
When access is the problem — this set is the solution.
If you maintain modern rifles, you’ll wonder how you lived without them.
