(FISTLS11-MTD)

For anyone who’s ever wondered: “Did I tighten that right?” — now you’ll know.

This kit gives you four preset torque limiters — 15, 25, 45 & 65 in-lb — the most commonly needed torque values for firearms setups. Each limiter tightens fasteners to its exact setting, then clicks and free-spins to stop you turning that screw into modern art.

It also includes Fix It Sticks’ Modular T-Drive, a compact handle that lets you apply consistent torque with comfort and control — whether at the bench, in the safe, or halfway through a muddy PRS stage.

Kit Includes

• ⭐ 15 in-lb Torque Limiter
• ⭐ 25 in-lb Torque Limiter
• ⭐ 45 in-lb Torque Limiter
• ⭐ 65 in-lb Torque Limiter
• 🔧 Modular T-Drive handle
• 🎒 Compact zippered case

Why this kit is a winner

• Covers the torque values you’ll use all the time
• Works with any ¼-inch bits or drivers
• Click + stop means perfect torque — no overdoing it
• Small enough that you can (and should) take it everywhere

Where to use it
Mounting scopes. Securing actions. Bolting Pic rails. Anything where the phrase “don’t overtighten that” has ever been muttered.

(FISPAK-AIO)

(For shooters who don’t trust “she’ll be right” maintenance)

This is the big-league pistol kit — the one you break out when you’re serious about keeping your handgun running flawlessly and fully in your control. Holster guns, competition pistols, optics-equipped rigs — if it sits in a safe or goes to the range, this kit makes sure it performs.

It’s like taking a proper gunsmith’s bench and shrinking it into a portable, organised, problem-solving machine. If a screw comes loose, a pin walks out, or your optic decides to go on its own little adventure — you fix it on the spot, properly.

🔧 What’s Inside

(Everything you need — zero filler)

Core Tools
• Ratchet T-Handle with locking hex drive
• Mini All-In-One Torque Driver — no more guessing torque
• Extension / punch holder
• Brass hammer head
• Soft, organised carry case
• Magnetic parts tray
• Bench block

Pistol Maintenance Essentials
• 1/16", 3/32", 5/32" pin punches
• 1/8" roll pin punch
• 1/16", 3/32", 1/8", 5/32" brass pin punches
• Set of four brass cleaning rods (8-32 thread compatible)
• Steel pick
• Cleaning brush
• 8-32 adapter

Red Dot / Handgun Optics Tools
• Aimpoint® bit
• Battery cap tool
• Grip screw bit
• Spring tool
• Slide tool

Glock®-Specific Helpers
• Magazine base plate removal tool
• Channel remover
• Channel installer
• Sight tool

1911 Support
• 1911 bushing wrench

Alignment & Build Tools
• T-pins (always useful during assembly)

🛠 Bits on Bits on Bits

21 x 1" chrome-plated bits
• Torx: T6, T8, T10, T15, T20, T25
• Metric Hex: 1.5, 2, 2.5, 3, 4mm
• SAE Hex: .050", 1/16", 5/64", 3/32", 1/8", 5/32"
• Phillips: P0, P1
• Slotted: 3/32", 3/16"

2 x 2" bits
• Torx: T10
• Slotted: 3/32"

🎯 Why You Want It

• Keeps your pistol(s) tight, tuned, and competition-ready
• Mini torque driver = precision where it matters
• Handle any optical or mechanical hiccup immediately
• Compact, organised, and zero dead weight
• Because letting a loose screw ruin a score is unacceptable

🔥 Ideal For

• Pistol shooters with optics
• Competition rigs and match prep
• Guns with lots of screws, springs, and “attitude”
• On-range armourer work
• Gun owners who take responsibility for their own performance

💬 Bottom Line

If you run pistols hard, treat them right.
This kit keeps your sidearm — and your score — locked in.

(FISFAK-AIO)

(AKA: Your Entire Workbench, Sorted Into a Carry Case)

If MacGyver was into precision shooting instead of mullets and explosions — this is what he’d carry.

This is the most comprehensive, most capable, “I can fix literally anything right now” toolkit Fix It Sticks makes… and it’s still portable. Take it to a match, the farm, the bench, or that mate’s place who always needs “a quick sight install” — this thing is ready.

Rifles? ✔️
Pistols? ✔️
Shotguns? ✔️
Optics? ✔️
Mysterious rattles? ✔️
Tiny roll pins that try to escape into another dimension? ✔️

If it goes bang and has screws, pins, or moving bits — this kit has a tool for it.

What’s Inside

(Brace yourself, it’s a big list — because this is a big kit.)

Choose your flavour:
✔ With All-In-One Torque Driver (large or mini)

Core Tools

• Ratchet T-Handle w/ locking hex drive
• Extension / punch holder
• ½″ socket + adapter
• Mini pry bar
• Bench block
• Magnetic tray (keeps tiny metal parts from entering the void)
• Soft, organised carry case

Platform Maintenance Tools

• Universal choke wrench
• 1911 bushing wrench
• Remington® 700 bolt opener
• Brass hammer head (for persuading things politely)
• A2 sight adjuster
• Aimpoint® bit
• Adjustable 3/8″ wrench
• Steel pick, bronze scraper, cleaning brush

Punches & Pin Tools
(aka “stay in there, you little %#&@” tools)

• Pin punch set
• Brass pin punch set
• Roll pin punch set
  (All 1/16" → 1/4")

Bolt / Action Care

• .223 bolt carrier group scraper
• .308 bolt carrier group scraper

Handgun Helpers

• Front sight tool (Glock® compatible)
• Magazine base plate tool (Glock)
• Channel remover / installer (Glock)

**Now the Bits…

SO. MANY. BITS.**

36 x 1" Chrome-Plated Bits

• Torx: T6, T8, T10, T15, T20, T25, T27, T30
• Metric Hex: 1.5–8mm
• SAE Hex: .050"–1/4" range
• Phillips: P0, P1, P2
• Slotted: 2–5mm

24 x 2" Chrome-Plated Bits

• Torx / Phillips / Slotted
• Hex (metric & SAE)
  (Full exact list preserved, no guesswork)

6 x 4" Extended Action Bits

• SAE Hex: 5/64", 1/8", 5/32", 3/16"
• Metric Hex: 5mm
• Torx: T30

Why you’ll love it

• It replaces a full gunsmith bench — in one case
• No more “I’ll fix it later” excuses — do it now
• Torque = accuracy = happy shooter
• Saves range days, matches, and friendships

Perfect for

• Competition shooters
• Working on multiple firearm platforms
• Serious home armourers
• Travelling with the ability to fix absolutely anything

Bottom line:
If you shoot a lot, this is the toolkit that prevents the wheels coming off — literally.

Fix It Sticks Model 700® Toolkit

A portable workshop built around the Model 700 platform.

(FIS-700TK)

The Remington 700 platform has become the foundation for countless hunting, competition and precision rifles—and the Fix It Sticks Model 700 Toolkit has been designed to keep them running smoothly when it matters.

This comprehensive kit combines general firearm maintenance tools with specialised Model 700 equipment, giving you the ability to torque components, access recessed action screws, clean the action, disassemble the bolt and handle minor repairs without dragging an entire workshop to the range.

At the heart of the kit is the Fix It Sticks Ratcheting T-Way Wrench and All-In-One Torque Driver, providing controlled torque adjustment from 15 to 65 in-lb. Whether you're working on action screws, scope rings, mounts or accessories, you can make precise adjustments using one compact system.

The dedicated Model 700 Quick Action Brush uses horizontal nylon brushes to clean the action raceways, while the rotating swab helps remove debris from inside the action. The included Model 700 Bolt Opener makes bolt and firing-pin disassembly far easier—without reaching for shoelaces, dental floss or whatever other questionable field-expedient method you've used in the past.

Everything is organised inside a compact soft carrying case with a moulded bit holder, magnetic parts patch and additional storage for small components and accessories.

Key Features

• Designed for maintaining and customising Model 700-style rifles.

• Ratcheting T-Way Wrench provides excellent leverage and control.

• All-In-One Torque Driver covers settings from 15 to 65 in-lb.

• Model 700 Quick Action Brush cleans the action raceways and internal surfaces.

• Dedicated Model 700 Bolt Opener assists with bolt and firing-pin disassembly.

• Extended action bits reach recessed screws in grips and trigger guards.

• Cleaning, punch and general maintenance tools included.

• Magnetic patch helps prevent screws and small components from disappearing.

• Compact soft carrying case keeps the complete system organised and ready to travel.

Kit Includes

• Ratcheting T-Way Wrench with Locking Hex Drive.

• All-In-One Torque Driver, adjustable from 15 to 65 in-lb.

• Model 700 Quick Action Brush with Large Parts Holder.

• Five replacement cleaning swabs.

• Model 700 Bolt Opener.

• Small Parts Holder.

• Extension and Punch Holder.

• 8-32 threaded adapter.

• 1/2-inch socket and 1/4-inch bit adapter set.

• Two brass cleaning rods that accept 8-32 threaded attachments.

• Cleaning brush.

• Steel pick.

• Brass hammer head.

• Three steel pin punches:

  • 1/16 inch

  • 3/32 inch

  • 1/8 inch

• Two 4-inch Extended Action Bits:

  • 5/32 inch

  • 3/16 inch

• Magnetic patch for holding screws and small parts.

• Soft carrying case with moulded bit holder.

• 24 electroless nickel-plated 1-inch bits.

Included 1-Inch Bits

Metric Hex

• 2.5mm

• 3mm

• 4mm

• 5mm

Imperial Hex

• .050 inch

• 5/64 inch

• 3/32 inch

• 1/8 inch

• 7/64 inch

• 9/64 inch

• 5/32 inch

• 3/16 inch

• 1/4 inch

Torx

• T8

• T10

• T15

• T20

• T25

• T27

• T30

Phillips

• PH1

• PH2

Slotted

• 3/16 inch

• 3/32 inch

Built for the range, field or workbench.

A dirty action, loose mount or incorrectly torqued action screw can quickly turn a good day into a frustrating one. The Fix It Sticks Model 700 Toolkit gives you the specialised tools needed to deal with those problems properly—without leaving the range or relying on improvised tools.

Compact enough to travel with your rifle but comprehensive enough to handle serious maintenance, it is an outstanding toolkit for hunters, competitive shooters and anyone who wants to look after their Model 700-style rifle properly.

Because when you've invested serious money into your rifle and optics, attacking them with the rusty Allen keys from the kitchen drawer probably isn't the best maintenance plan.

(FIS-WORKS-VTD)

(All-In-One Torque Driver + Firearm Maintenance & Accessory Bit Kit)

If you’re the type of shooter who actually maintains their gear instead of leaving it up to hope and duct tape… this is your kit.

“The Works” is your fix-anything, tighten-everything, sort-your-life-out toolkit — designed for when a loose optic, stubborn screw, or gunked-up bolt threatens to ruin your day. It packs a torque driver, cleaning gear, adjustment tools and a frankly ridiculous number of bits into one compact, take-everywhere case.

You’ll wonder how you got through matches without it.

What’s Inside

Core Tools

• Adjustable All-In-One Torque Driver (15–65 in-lb)
• T-Handle Wrench
• ½″ Socket & Bit Adapter

Firearm Setup & Adjustment Tools

• Action & chassis hardware tools
• Mini pry bar (for when “gentle persuasion” isn’t enough)
• Steel & plastic pin punches
• General hardware driver for bases, rails and accessories
• Tough castle-style wrench ideal for barrel nuts, buffer tubes, lock collars, etc.

Cleaning & Bolt Maintenance Tools

• Bolt & carrier scraper (because carbon never takes a day off)
• Bronze scraper
• Steel pick
• Cleaning brush bit
• Brass cleaning rods (8-32 thread) + adapters

Handgun & Shotgun Essentials

• Front sight tool (Glock® compatible)
• Universal choke tube wrench
• 1911 bushing tool

Bits — 24 x Electroless-Nickel ¼″ Drivers

• Torx: T8, T10, T15, T20, T25, T27, T30
• Hex SAE: .050", 5/64", 3/32", 1/8", 7/64", 9/64", 5/32", 3/16", 1/4"
• Hex Metric: 2.5mm, 3mm, 4mm, 5mm
• Phillips: P1, P2
• Slotted: 3/16", 3/32"

Extra Goodies

• Magnetic parts patch (keeps screws from rolling into another postcode)
• Organized molded case that’s compact enough for your range backpack

Why you need it

• Torque things properly — no more “good enough”
• Fix issues on-the-fly and get back to shooting
• One case replaces half your bench tools
• If it twists or tightens on a firearm — this kit does it

Ideal for

• Precision rifle setup and maintenance
• Optics installation & adjustment
• Accessory installs (rails, bipods, sling mounts, chassis parts)
• Bolt, action & trigger maintenance
• Shotgun and pistol tune-ups

Bottom line:
It’s called “The Works” because it handles the work. All of it.

(FIS-RBO)

(Because field-stripping shouldn’t require a wrestling match)

When you’re running a Remington® 700-platform rifle and need to access the firing pin assembly, this is the tool that keeps things fast, clean and drama-free. No pliers. No screwdriver blade gymnastics. Just a clean “bottle-opener” style lever motion that does the job without chewing up your bolt.

The synthetic bushing protects your finish. The steel body keeps the action strong and reliable. And with a ¼" hex base, it works with any Fix It Sticks driver or T-Way wrench — so it slots straight into your existing toolkit.

🔧 Features & Benefits

• Quick, easy firing-pin access
• Steel construction for durability, with molded bushing for finish protection
• Clean “bottle-opener” action for effortless leverage
• ¼" hex base — compatible with all Fix It Sticks drivers
• Compact and lightweight — perfect for field or bench use
• Designed specifically for Remington® 700-style bolts

🎯 Ideal For

• Bolt disassembly in the field
• Long-range shooters who can’t afford delays
• Any R700 owner with pride in their gear
• Competition or hunting rifles that need fast serviceability

💬 Bottom Line

A tiny tool that solves a big headache.
Keep your Rem 700 operating clean, slick and competition-ready.